High Strength Fesimg Alloy RE FeSiMg RE Si Mg Ferro Alloys Nodulant 3mnm 6 mm

High Strength Fesimg Alloy RE FeSiMg RE Si Mg Ferro Alloys Nodulant 3mm 6 mm

Product introduction:

     RE FeSiMg is an alloy made by melting ferrosilicon, calcium, magnesium, rare earth elements, etc. Due to its strong deoxidation and desulfurization effects, RE FeSiMg is a good phosphorous agent. RE FeSiMg is the main raw material for producing FeSi from the rare earth elements of magnesium. frequency.

Specification1:

Specification2:

Product advantages:

     1. a strong ability to spherode by reducing the amount of residual magnesium required to ensure the phospherisation of graphite, sub -crystalline processing and hypereutrophic components, hot metal with higher sulphur content and lower temperatures; By eliminating interference with the rare earth elements magnesium phosphorous agent, the adverse effects of the spherical elements are widely used as a spherical agent for the production of high -strength tubes.

     2. The kinetic conditions of the spheroid design reaction are good, the reaction is relatively stable, and the process performance through the rinsing method is better.

     3. The cast performance of solid iron has significantly improved, fluid flow has increased 40% compared to magnesium ore, the film forming temperature of the rare earth elements magnesium -phosphating agent decreases approximately 50 176Cand the expansion value before shrinking Reduced 0.3 to 0.4% so that shrinkage and clip are done. Conjuring heads such as slag, subcutaneous pores and cold partitions have decreased.

     4. Due to the rarity of alloying of melting iron and dispersion, casting defects have been reduced, thereby improving the mechanical properties of ductile iron. Stretch and impact resistance, usually ten percent.

     5. Rare soil containing cerium Magnesium phospheroding agent also has the ability to resist sphere design with certainty

.

Graphic:

F & Q:

1. What is our MOQ?

Basically, our MOQ is 20 tons. There is no specific limit to order, we can give the best offer according to your situation.

2. Do you provide samples?

Yes, we do. Samples are always available and they can be sent to you directly.

3. How long does the delivery time take?

Our normal delivery time takes about 3 weeks once the contract singed, but it also depends on the quantity of the order.

4. Can we visit your plant?

Of course, we will be always looking for you.