Micro Carbon Low Carbon Ferro Chrome Cr C Si P S Material For Chemical Industry

Micro Carbon Low Carbon Ferro Chrome Cr C Si P S Material For Chemical Industry

Description:

     Low carbon ferrochrome is an iron alloy composed of iron and silicon. Low-carbon ferrochrome is a ferrosilicon alloy made from coke, steel scrap, quartz (or silica) and smelted in an electric furnace. Since silicon and oxygen are easily synthesized into silica, low-carbon ferrochrome is often used as a deoxidizer in steelmaking, and at the same time, a large amount of heat is released during the formation of SiO2, and it is also advantageous to increase the temperature of the molten steel while deoxidizing. At the same time, low-carbon ferrochrome can also be used as an alloying element additive, widely used in low-alloy structural steel, spring steel, bearing steel heat-resistant steel and electrical silicon steel. Low-carbon ferrochrome is commonly used in iron alloy production and chemical industry. reducing agent.

Application:

     1. Used as a deoxidizer and alloys in the steel industry.
     2. Used as an inoculant and ballast in the cast iron industry.
     3. Used as a reducing agent in the manufacture of ferro-alloys.
     4. Use in other areas. The fine or atomized iron chromium powder chromium powder can be used as a coating for the electrode of the Southern manufacturing industry in the prosperity sector. Slow silicon iron chromium can be used in the chemical industry to produce products such as silicon.

Classification:

      Ferrochrome is classified into high carbon ferrochrome according to different carbon content, including loading grade ferrochrome (C≦10%), medium carbon ferrochrome (C≦4.0%), low carbon ferrochrome (C≦0.5%), microcarbon Ferrochrome (C≦0.15%), etc. Commonly used are silicon chromium alloys, chromium nitride and the like. Ferrochromium is mainly used as an alloying additive for steelmaking, and was added in the later stages of refining of steelmaking. In the smelting of low-carbon steel such as stainless steel, low-carbon and micro-carbon ferrochrome must be used, so the production of refined ferrochrome has once been developed on a large scale. Due to the improvement of the steelmaking process, when producing steel such as stainless steel by the AOD method (see refining outside the furnace), the carbon ferrochrome (mainly the charging grade ferrochrome) is used for the furnace, so it is only necessary to increase the temperature in the later stage. Micro-carbon ferrochrome is used to adjust the composition, so now the focus of ferrochrome production is to refine carbon ferrochrome.

Specification:

Graphic:

F & Q:

1. What is our MOQ?

Basically, our MOQ is 20 tons. There is no specific limit to order, we can give the best offer according to your situation.

2. Do you provide samples?

Yes, we do. Samples are always available and they can be sent to you directly.

3. How long does the delivery time take?

Our normal delivery time takes about 3 weeks once the contract singed, but it also depends on the quantity of the order.

4. Can we visit your plant?

Of course, we will be always looking for you.