High Carbon Ferro Manganese Rich Slag Industrial Silicon Slag Industrial Waste

High Carbon Ferro Manganese Rich Slag Industrial Silicon Slag Industrial Waste

Introduction:

     Silico-manganese slag, also called silico-manganese smelting slag, is an industrial waste slag emitted when smelting silicon-manganese alloy. Its structure is loose, and its appearance is often light green particles, which are composed of some irregular amorphous amorphous particles.

     Recycling process: silicomanganese slag is brittle and brittle. The crushing machine can crush large pieces of silicomanganese slag into small pieces, and then enter the fine crusher to further crush the coarsely crushed materials to ensure that the materials entering the silo can reach the monomer. The degree of dissociation is then evenly sorted by a vibrating feeder and a belt conveyor to the trapezoidal jig. The main purpose of the crushing is to break the structure of the continuous body. The main purpose of the jigging is to recover the silicon-manganese alloy from the silicon-manganese slag. There is a large difference in specific gravity between silicomanganese slag and silicomanganese alloy. The metal and waste slag can be separated by the re-selection of the jig to obtain pure alloy and waste slag. Finally, the concentrate and tail can be separated by dehydration of the dewatering sieve. The mine is dehydrated.

Use:

     Since the silicon-manganese slag contains a certain amount of silicon-manganese alloy, the recovery of the silicon-manganese alloy can be profitable, and at the same time reduce the occupation of the land and the environmental pollution of the silicon-manganese slag. The method of re-selecting silicon-manganese slag firstly recovers the silicon-manganese alloy from the waste silico-manganese slag, and then uses the waste slag as a building material, which can be used in the construction industry.

Specification:

Graphic:

F & Q:

1. What is our MOQ?

Basically, our MOQ is 20 tons. There is no specific limit to order, we can give the best offer according to your situation.

2. Do you provide samples?

Yes, we do. Samples are always available and they can be sent to you directly.

3. How long does the delivery time take?

Our normal delivery time takes about 3 weeks once the contract singed, but it also depends on the quantity of the order.

4. Can we visit your plant?

Of course, we will be always looking for you.